Adjust the amplitude of the equalization with the 'Q' knob.ġ4.
Select the specific frequency you want to adjust with the 'Freq' knob.ġ3. Press the 'Mode' button to switch between available equalization types.ġ2. Select one of the 4 frequency bands (Highs, High Mids, Low Mids, and Lows) using the corresponding knobs.ġ1. Press the 'Equalizer' button to activate the equalizer section.ġ0. Press the 'Comp/Exp' button to activate the compressor and adjust the threshold accordingly.ĩ. Press the 'Gate/Ducker' button to activate the noise gate and adjust the threshold accordingly.Ĩ. Press the 'Low Cut' button and select the desired cutoff frequency to eliminate unwanted lows.ħ. Press the 'Phase' button to invert the phase of the channel if necessary.Ħ. Press the '48 V' button to apply phantom power for use with condenser microphones.ĥ. Adjust the preamp gain for the selected channel using the 'Gain' knob.Ĥ. Mute the respective channels before turning on or off their phantom power supply to avoid audible noise when doing so.ģ. Press the 'View' button on the channel strip to access more detailed parameters on the Main Screen.Ģ. To remove the information from a previously made mix and prepare the Behringer X32 Compact console for a new mix, follow these steps:ġ.
